194000757 - 5540D14 L/H OR R/H FOG LIGHT BULB (ONE) - R+R

Removing ( Refitting ) - Turn the ignition key to the OFF position.- Disconnect the negative battery terminal.
DescriptionConnector
BATTERY    See A001 BATTERY
1. Using the special tool, release the four retaining buttons for the front part of the protection under the engine from the bodyshell.
ToolDescriptionFunctionValidity
1881138000CaliperBand opening
2. Undo the four bolts (2a) securing the front protection under the engine (2b) to the bumper trim.- Remove the front protection under the engine from the vehicle.
1. Disconnect the electrical connection from the fog light.
DescriptionConnector
1LEFT FOG LIGHT    See F015 LEFT FOG LIGHT
DescriptionConnector
1RIGHT FOG LIGHT    See F016 RIGHT FOG LIGHT
2. Turn in an anti-clockwise direction to open the fog light cover.
1. Disconnect the electrical connections for the bulb.2. Release the fastening clips and remove the bulb.
If the bulb is working properly, avoid touching it with your hands. If this does happen, clean the bulb with alcohol.
Refitting ( Removing ) - Check the condition of the bulb and make sure it is clean; if necessary, replace it with a new one.
Avoid touching the bulb with your hands. If this does happen, clean the bulb with alcohol.
- Insert the bulb correctly in the bulb holder housing for the fog light.- Connect the electrical connections to the bulb.- Attach the retaining clips.- Position the protective cover rotating it in a clockwise direction.- Connect the electrical connection to the fog light.
DescriptionConnector
LEFT FOG LIGHT    See F015 LEFT FOG LIGHT
DescriptionConnector
RIGHT FOG LIGHT    See F016 RIGHT FOG LIGHT
- Place the front protection under the engine in position.- Tighten the four bolts fixing the front protection under the engine to the bumper trim.- Fit the four retaining buttons for the front part of the protection under the engine to the bodyshell.- Connect the negative battery terminal.
DescriptionConnector
BATTERY    See A001 BATTERY