194000891 - 7010A08 REAR SIDE DOOR INTERIOR SUPPORT FRAME - R.R. WITH DOOR PANEL REMOVED

Removing ( Refitting )
Lower the window until the retaining clip is accessible through the inspection opening.
1. Release the window (1a) from the retaining clip (1b) accessible via the inspection opening (1c), raise to the end of its travel and support as appropriate.
1. Lift up the ring nut (1a) and disconnect the rear side door coupling (1b).
DescriptionConnector
1bLEFT REAR DOOR COUPLING    See D035 LEFT REAR DOOR COUPLING
DescriptionConnector
1bRIGHT REAR DOOR COUPLING    See D036 RIGHT REAR DOOR COUPLING
2. Prise up the rear side door joint bulkhead couplings and push into the door as far as possible.
1. Unscrew the bolts and move the support frame carefully.- Disconnect the electrical connection for the door lock actuator.
DescriptionConnector
LEFT REAR DOOR LOCK GEARED MOTOR    See N055 LEFT REAR DOOR LOCK GEARED MOTOR
DescriptionConnector
RIGHT REAR DOOR LOCK GEARED MOTOR    See N056 RIGHT REAR DOOR LOCK GEARED MOTOR
2. Release seal (2a) for passage of connection link (2b) and push inwards and remove support frame (2c).
Refitting ( Removing ) - Check that the frame is undamaged and ensure the perimeter seal is intact and clean. Also check that the contact surface on the door frame is clean.- Bring the support frame up to the door and fit the front side door junction bulkhead coupling in its seat.- Insert the connection link in the support frame, fit the passage seal and connect the door lock actuator electrical connection.
DescriptionConnector
LEFT REAR DOOR LOCK GEARED MOTOR    See N055 LEFT REAR DOOR LOCK GEARED MOTOR
DescriptionConnector
RIGHT REAR DOOR LOCK GEARED MOTOR    See N056 RIGHT REAR DOOR LOCK GEARED MOTOR
- Position the support frame on the door frame and tighten the fixing bolts.- Connect the front side door junction and lower the ring nut.
DescriptionConnector
LEFT REAR DOOR COUPLING    See D035 LEFT REAR DOOR COUPLING
DescriptionConnector
RIGHT REAR DOOR COUPLING    See D036 RIGHT REAR DOOR COUPLING
- Secure the window to the window opening mechanism retaining clip.