194001212 - REMOVAL-REFITTING - GENERAL REMARKS

Below is the graphic index and description of the symbols that appear in the repair procedures.

Symbols

1. Cutting with alternating saw2. Cutting with circular blade saw3. Cleaning with rotary brush4. Removing spot welds with chamfering machine5. Removing spot welds with drill. Drilling for MIG welding6. Removing body panel with chisel. Drilling for MIG welding7. Applying electro-weldable protectives8. Applying high thickness electro-weldable protectives9. Centering components10. Measurement11. Fastening components12. Fastening threaded rivets13. Checking alignment gaps14. Straightening edges with hammer and dolly block15. Removing spot welds with hammer and chisel16. Removing treatment with power knife17. Spot welding18. MIG welding19. Welding with oxy-acetylene torch20. Grinding21. Applying anti-oxidant protectives22. Application of sealants23. Application of underbody protection24. Application of paint25. Application of protective waxes26. Application of foam products27. Heating with hot air28. Removing metal offcuts

Process symbols

Below are the work symbols that are described in the repair procedure with an example of their application. In the illustrations for the procedures, next the number of the procedure steps for welding operations, sometimes there are numbers in brackets that indicate the number of spot welds to be made or filled by MIG welding.Cutting with a power saw or chisel
Spot welding.
Spot welding (three panels)
MIG welding - seam - sections
Brazing
MIG fill welding
Sealing