194002130 - 1016E38 SINGLE CYLINDER HEAD OR (ONE) L OR R, REMOVED - GRINDING

- Check that the planarity of the lower cylinder head plane corresponds to the recommended values.

Measurement	Value		Validity
Cylinder head lower surface flatness	0.1 mm		1.9 JTD 8V2.4 JTD 20V

1. If the planarity of the lower cylinder head plane does not correspond to the recommended figures, regrind it without exceeding the minimum permitted height.

Measurement	Value		Validity
Cylinder head lower plane minimum permitted height	140.85 - 141.15 mm		1.9 JTD 8V