194000218 - 0010T67 HYDRAULIC CLUTCH SYSTEM - BLEED AIR

1. Remove the brake/clutch fluid reservoir cap and connect the equipment to the reservoir.
ToolDescriptionFunctionValidity
1806524000Brake-clutch bleeding equipmentBrake-clutch hydraulic systems bleeding
1. Remove the protective plug and connect the recovery device (pipe and reservoir) to the clutch hydraulic actuator bleed.2. Open the bleed valve on the clutch hydraulic actuator.- Open the fluid reservoir tap slowly.- Wait for all the air in the hydraulic system to escape.- Close the bleed valve on the clutch slave cylinder and refit the protective cap in its seat.
- Remove the recovery device.- Remove the bleed equipment.
ToolDescriptionFunctionValidity
1806524000Brake-clutch bleeding equipmentBrake-clutch hydraulic systems bleeding
- Check that the cluch disengages and that the gears engage properly.- Check the fluid level in the brake - clutch reservoir is correct.