1040A70 SUBMERGED PUMP ASSEMBLY COMPLETE WITH LEVEL GAUGE CONTROL - R + R - Fiat - CROMA - eLearn

194000289 - 1040A70 SUBMERGED PUMP ASSEMBLY COMPLETE WITH LEVEL GAUGE CONTROL - R + R

) - Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 BATTERY

Op. 7050A20 ONE-PIECE REAR SEAT CUSHION - R.R. 1. Use tool to release and remove the access cover to the fuel pump assembly.

Position the tool and apply leverage as indicated in the lever to prevent the cover tab deforming.

1. Disconnect the electrical connection from the submerged pump assembly complete with level gauge.

	Description	Connector
1	Fuel pump and level gauge	See N040 FUEL PUMP AND LEVEL GAUGE

2. Disconnect the rapid connectors for the fuel supply and return pipes, submereged pump assembly side complete with level gauge.

1. Undo the ring nut (1a) using the tool (1b).

Tool	Description	Function	Validity
1870736000	Spanner	Loosen/tighten ring nut securing submerged pump assembly complete with level gauge

2. Remove the submerged fuel assembly complete with level gauge control.3. Remove the O-ring.

Refitting ( Removing

) - Place a new O-Ring seal in the housing on the fuel tank collar and make sure that it is correctly positioned.- Position the submerged pump assembly complete with level gauge control in its housing.

Fit the submerged pump assembly complete with level gauge ensuring that the reference is in line with the arrow on the tank.

- Tighten the ring nut securing the submerged pump assembly complete with level gauge using the tool.

Tool	Description	Function	Validity
1870736000	Spanner	Loosen/tighten ring nut securing submerged pump assembly complete with level gauge

- Connect the rapid connectors for the fuel supply and return pipes, submereged pump assembly side complete with level gauge.- Connect the electrical connection to the submerged pump assembly complete with level gauge.- Place the access cover to the submerged pump assembly complete with level gauge back in its housing and secure it using the bolts. Op. 7050A20 ONE-PIECE REAR SEAT CUSHION - R.R.- Connect the negative battery terminal.