1060G50 THROTTLE BODY - R.R - Fiat - CROMA - eLearn

194000340 - 1060G50 THROTTLE BODY - R.R

) - Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 BATTERY

1. Loosen the band and disconnect the oil vapour recovery pipe from the engine oil filler.2. Undo the bolts securing the throttle body.

1. Move the throttle body (1a) from its housing as necessary to disconnect the electrical connection (1b), then remove it.

	Description	Connector
1b	Integrated throttle casing actuator	See N075 INTEGRATED THROTTLE CASING ACTUATOR

- Remove the gasket.

Refitting ( Removing

) - Place the gasket back in its housing.- Connect the electrical connection to the throttle body, then place it back in position.1. Tighten the bolts securing the throttle body to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Throttle body	Bolt	-	(chamber side) 2.5	1.9 JTD 16v2.4 JTD 20v

2. Connectt the oil vapour recovery pipe to the engine oil filler fitting and tighten the band.

- Connect the negative battery terminal.