3310A30 FRONT BRAKE CALIPER (ONE) - R.R - Fiat - CROMA - eLearn

194000469 - 3310A30 FRONT BRAKE CALIPER (ONE) - R.R

)

The following procedure describes left front brake caliper removal/refitting, do the same for the right front brake caliper.

- Position the vehicle on a lift.- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 BATTERY

Op. 4450B02 LEFT FRONT WHEEL - R.R Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R. Op. 3340B10 HOSE TO L/H OR R/H FRONT BRAKES (ONE) - R+R1. Disconnect the electrical connection for the brake pad wear sensor.

	Description	Connector
1	Left brake pad wear sensor (switch)	See K020 LEFT BRAKE PAD WEAR SENSOR (SWITCH)

There is no brake pad wear sensor on the right front caliper.

2. Undo the bolt (2a) for the bracket (2b) securing the brake pad wear sensor electrical connection.3. Undo the bolts (3a) and remove the brake caliper (3b).

Refitting ( Removing

) 1. Position the brake caliper bracket (1a) in its housing and secure it tightening the bolts (1b) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Front brake calipers	Bolt	M8x1	(bracket side) 3.1 - 3.8	1.9 JTD 16v2.4 JTD 20v

2. Tighten the bolt (2a) for the bracket (2b) securing the brake pad wear sensor electrical connection.3. Connect the electrical connection for the brake pad wear sensor.

Op. 3340B10 HOSE TO L/H OR R/H FRONT BRAKES (ONE) - R+R Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R. Op. 4450B02 LEFT FRONT WHEEL - R.R- Connect the negative battery terminal.- Remove the vehicle from the lift.