194000490 - 3330C44 BRAKE FLUID MINIMUM W/L SWITCH - R + R

Removing ( Refitting ) - Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 BATTERY

1. Disconnect the electrical connection from the brake fluid minimum level warning light switch.

	Description	Connector
1	Brake fluid level sensor (switch)	See K025 BRAKE FLUID LEVEL SENSOR (SWITCH)

2. Adjust the clip and remove the minimum brake fluid level warning light switch. Refitting ( Removing ) - Place the minimum brake fluid level warning light switch in its housing.

Make sure that the fastening clip is attached.

- Connect the electrical connection to the brake fluid minimum level warning light switch.- Connect the negative battery terminal. Removing ( Refitting ) - Position the vehicle on a lift.- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.    Op. 3330C12 MASTER CYLINDER (PUMP) - R.R. FOR RIGHT HAND DRIVE VERSIONS1. Expand the fastening tabs, then release the minimum brake fluid warning light switch and remove it. Refitting ( Removing ) - Place the minimum brake fluid warning light switch back in its housing until the fastening tabs are attached.    Op. 3330C12 MASTER CYLINDER (PUMP) - R.R. FOR RIGHT HAND DRIVE VERSIONS    Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY    Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.- Connect the negative battery terminal.- Remove the vehicle from the lift.