194000502 - 3340B10 HOSE TO L/H OR R/H FRONT BRAKES (ONE) - R+R

Removing ( Refitting )
The procedure which follows describes the removing-refitting of the flexible pipe to the left front brake, the same operations should be carried out for the flexible pipe to the right front brake.
- Position the vehicle on a lift.    Op. 4450B02 LEFT FRONT WHEEL - R.R    Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R.- Replace the brake-clutch fluid reservoir plug using the tool.
ToolDescriptionFunctionValidity
2000001400PlugBrake/clutch fluid reservoir cap
1. Undo the connector (1a) and disconnect the rigid pipe (1b), flexible pipe side.2. Withdraw the hose retaining clip.
1. Release the flexible pipe to the front brake from the bracket on the shock absorber.2. Undo the connector (2a) and remove the flexible pipe to the front brake (2b).
Refitting ( Removing ) 1. Place the flexible pipe to the front brake (1a) back in its housing and connect it to the brake caliper tightening the connector (1b) to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Flexible pipe to front brakesConnectorM10(brake caliper side) 1.4 - 1.81.9 JTD 16v2.4 JTD 20v
2. Position the flexible pipe to the front brake on the bracket on the shock absorber.
1. Refit the hose retaining clip in its housing.2. Connect the rigid pipe (2a), flexible pipe side and tighten the connector (2b) to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Brake pipe connectorsConnectorM10/M121.4 ÷ 1.8
- Support the tool with the brake-clutch fluid reservoir plug.
ToolDescriptionFunctionValidity
2000001400PlugBrake/clutch fluid reservoir cap
    Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY    Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR    Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R.    Op. 4450B02 LEFT FRONT WHEEL - R.R- Remove the vehicle from the lift.