194000503 - 3340B30 HOSE TO L/H OR R/H REAR BRAKES (ONE) - R+R

Removing ( Refitting )
The following procedure describes removal/refitting of the hose to the left rear brake, do the same to remove/refit the hose to the right rear brake.
- Position the vehicle on a lift.    Op. 4450B06 LEFT REAR WHEEL - R.R    Op. 7055B44 LEFT REAR WHEEL ARCH LINER - R.R- Replace the brake-clutch fluid reservoir plug using the tool.
ToolDescriptionFunctionValidity
2000001400PlugBrake/clutch fluid reservoir cap
1. Undo the connector (1a) and disconnect the rigid pipe from fitting to rear brake (1b), flexible pipe side.2. Withdraw the hose retaining clip.3. Undo the connector (3a) and remove the hose to the rear brake (3b).
Refitting ( Removing ) 1. Refit the flexible pipe to the rear brake (1a) and connect to the brake caliper by tightening fitting (1b) to the specified torque.
ComponentFasteningdia  Value (daNm)Validity
Brake pipe connectorsConnectorM10/M121.4 ÷ 1.8
2. Refit the hose retaining clip in its housing.3. Connect the rigid pipe from the fitting to the rrear brake (3a), hose side and tighten the connector (3b) to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Brake pipe connectorsConnectorM10/M121.4 ÷ 1.8
- Support the tool with the brake-clutch fluid reservoir plug.
ToolDescriptionFunctionValidity
2000001400PlugBrake/clutch fluid reservoir cap
    Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY    Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR    Op. 7055B44 LEFT REAR WHEEL ARCH LINER - R.R    Op. 4450B06 LEFT REAR WHEEL - R.R- Remove the vehicle from the lift.