194000545 - 4410C12 FRONT SUSPENSION ANTI ROLL BAR JOINT (END) (ONE), LH OR RH - R.R

Removing ( Refitting )

The following procedure describes the removing-refitting of the right front suspension anti-roll bar joint, the same operations should be carried out for the left front anti-roll bar joint.

- Position the vehicle on a lift.    Op. 4450B04 RIGHT FRONT WHEEL - R.R1. Undo the nuts (1a), (1b) and remove the front suspension anti-roll bar joint (1c).

Use a spanner on the facings on the joint for counter-torque.

Refitting ( Removing ) 1. Place the front suspension anti-roll bar joint in its housing and secure it tightening the nuts (1b) and (1c) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Front suspension anti-roll bar joint	Nut	M12	(shock absorber side) 6.0 - 7.0

Component	Fastening	dia	Value (daNm)	Validity
Front suspension anti-roll bar joint	Nut	M12	(anti-roll bar side) 6.0 - 7.0

    Op. 4450B04 RIGHT FRONT WHEEL - R.R- Remove the vehicle from the lift.