4450D10 HUB FOR ONE REAR WHEEL, L/H OR R/H - R+R WITH WHEEL REMOVED - CHECK WHEEL GEOMETRY SEPARATELY - Fiat - CROMA - eLearn

194000570 - 4450D10 HUB FOR ONE REAR WHEEL, L/H OR R/H - R+R WITH WHEEL REMOVED - CHECK WHEEL GEOMETRY SEPARATELY

)

The following procedure describes the removing-refitting of the left rear wheel hub, carry out the same operations for the right rear wheel hub.

- Position the vehicle on a lift. Op. 7055B44 LEFT REAR WHEEL ARCH LINER - R.R Op. 3310B57 REAR BRAKE CALIPER BRACKET (ONE), LEFT OR RIGHT - R.R. Op. 3310B48 REAR BRAKE DISC (ONE), LEFT OR RIGHT - R.R.1. Disconnect the electrical connection from the left rear wheel rpm sensor.

	Description	Connector
1	Left rear wheel sensor for ABS	See K075 LEFT REAR WHEEL SENSOR FOR ABS

2. Undo the rear wheel hub retaining nuts.

1. Remove the rear wheel hub (1a) and the brake disc shield (1b).

Refitting ( Removing

) - Place the brake disc shield and the rear wheel hub back in their housings.1. Tighten the new nuts fixing the rear wheel hub to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Rear wheel hub	Nut (to replace)	M10	(steering knuckle side) 5.0 - 6.1 + 75°

2. Connect the electrical connection to the left rear wheel rpm sensor.

Op. 3310B48 REAR BRAKE DISC (ONE), LEFT OR RIGHT - R.R. Op. 3310B57 REAR BRAKE CALIPER BRACKET (ONE), LEFT OR RIGHT - R.R. Op. 7055B44 LEFT REAR WHEEL ARCH LINER - R.R- Remove the vehicle from the lift.