194000594 - 5010D56 SOLAR SENSOR - R.R FOLLOWING ELECTRICAL SYSTEM CHECK

Removing ( Refitting ) - Turn the ignition key to the OFF position.- Disconnect the negative battery terminal.
DescriptionConnector
BATTERY    See A001 BATTERY
Working at the top of the instrument panel in the middle:1. Using the special tool, release the trim (1a) supporting the solar sensor (1b0.
ToolDescriptionFunctionValidity
1878077000KnifeRetainer removal
Before disconnecting the electrical connection, fit a sensor to prevent the sensor wiring from accidentally getting into the dashboard trim.
1. Disconnect the electrical connection (1a), release it from the bayonet fitting and remove the solar sensor (1b) from the support trim (1c).
DescriptionConnector
1aSOLAR SENSOR    See K090 SOLAR SENSOR
Refitting ( Removing ) - Check that the solar sensor is not damaged.- Fit the sensor on the support trim mounting.- Connect the electrical connection and secure it using the mounting.
DescriptionConnector
SOLAR SENSOR    See K090 SOLAR SENSOR
- Fit the support trim in its housing in the dashboard and attach it to the mountings.Connect the negative battery terminal.
DescriptionConnector
BATTERY    See A001 BATTERY