194000626 - 5040C80 AIR INTAKE AND RECIRCULATION FLAP - R R WITH AIR CONDITIONING HOUSING DISCONNECTED

Removing ( Refitting ) 1. Release the seal from the air intake vent and remove it.
1. Disconnect the electrical connection from the air recirculation flap control motor.
DescriptionConnector
1OUTSIDE AIR/RECIRCULATION INTAKE FLAP ACTUATOR    See N082 OUTSIDE AIR/RECIRCULATION INTAKE FLAP ACTUATOR
2. Release the wiring (2a) from the mountings, undo the fixing bolts (2b) and remove the intake air and recirculation flap (2c) from the air conditioning casing.
Refitting ( Removing ) - Check that the intake air and recirculation flap assembly is not damaged.- Place the intake air and recirculation flap assembly on the climate control casing, check that the assembly is correctly matched and tighten the fixing bolts.- Connect the electrical connection to the air recirculation flap control motor.
DescriptionConnector
OUTSIDE AIR/RECIRCULATION INTAKE FLAP ACTUATOR    See N082 OUTSIDE AIR/RECIRCULATION INTAKE FLAP ACTUATOR
- Attach the wiring to the mountings.