194000650 - 5050B32 WINDSCREEN WIPER ARM/S - R+R

Removing ( Refitting )     Op. 5050B28 WINDSCREEN WIPER BLADE/S - R+R- Open the bonnet.1. Using the special tool, release the fixing buttons (1a) and remove the windscreen base trim right cover (1b).

Tool	Description	Function	Validity
1878077000	Knife	Retainer removal

1. Release the protective cap for the nut fixing the wiper arm. 1. Undo the fixing nut (1a) and release the wiper arm (1b) from the operating pin.- Remove the wiper arm from the vehicle. Refitting ( Removing ) - Check that the windscreen wiper arm is not damaged.- Position the wiper arm correctly on the operating pin.- Screw in the nut fixing the wiper arm and tighten it to torque.

Component	Fastening	dia	Value (daNm)	Validity
WINDSCREEN WIPER ASSEMBLY ON BRACKET	Bolt	M6	0,8 ÷ 1,2

- Fit the protective cap for the nut fixing the wiper arm.- Position the left cover and secure it to the windscreen base trim.- Close the bonnet.    Op. 5050B28 WINDSCREEN WIPER BLADE/S - R+R- Check that the windscreen wiper arm(s) is (are) working.