5050D13 HEADLAMP WASHER SYSTEM TYPES AND FITTINGS - R R - Fiat - CROMA - eLearn

194000660 - 5050D13 HEADLAMP WASHER SYSTEM TYPES AND FITTINGS - R R

) - Disconnect the negative battery terminal.

	Description	Connector
	BATTERY	See A001 BATTERY

1. Using the special tool, release the four retaining buttons for the front part of the protection under the engine on the bodyshell.2. Undo the four bolts (2a) securing the front protection under the engine (2b) to the bumper trim.- Remove the front protection under the engine from the vehicle.

Tool	Description	Function	Validity
1878077000	Knife	Retainer removal

Op. 4450B02 LEFT FRONT WHEEL - R.R Op. 4450B04 RIGHT FRONT WHEEL - R.R Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R. Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R.1. Working on the band (1a) disconnect the pipe (1b) from the electric pump (1c).

1. Adjust the band (1a) and disconnect the pipe (1b) from the headlamp washer jet (1c), then repeat the operation on the other side of the vehicle.

1. Using the special tool, release the retaining buttons (1a) along the entire length and remove the pipe (1b) complete with connectors.

Tool	Description	Function	Validity
1878077000	Knife	Retainer removal

Refitting ( Removing

) - Check that the pipes and the connectors are not damaged.- Position the pipe complete with connectors and fit the retaining buttons.- Connect the pipe to the headlamp washer jet.- Connect the pipe to the electric pump. Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R. Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R. Op. 4450B04 RIGHT FRONT WHEEL - R.R Op. 4450B02 LEFT FRONT WHEEL - R.R- Check that the front protection under the engine is not damaged.- Position the front protection and fit the four retaining buttons.- Tighten the bolts fixing the front protection to the bumper trim.- Connect the negative battery terminal.

	Description	Connector
	BATTERY	See A001 BATTERY