5505B11 FRONT DOOR WIRING (ONE) LEFT OR RIGHT - R.R - Fiat - CROMA - eLearn

194000682 - 5505B11 FRONT DOOR WIRING (ONE) LEFT OR RIGHT - R.R

) - Turn the ignition key to the OFF position.- Disconnect the negative battery terminal.

	Description	Connector
	BATTERY	See A001 BATTERY

Op. 7005E12 CORNER COVER FOR ONE FRONT SIDE DOOR, LH OR RH - R.R. Op. 7005E14 TOP COVER OF FRONT SIDE DOOR INNER PANEL - R R OR REPLACE Op. 7005M14 SWITCH UNIT ON DRIVER'S FRONT DOOR - R.R. Op. 7005M12 PASSENGER SIDE FRONT DOOR ELECTRICALLY OPERATED WINDOW SWITCH - R.R. Op. 7005E10 FRONT SIDE DOOR INTERIOR PANEL - R.R. Op. 7005D15 FRONT SIDE DOOR DESCENDING WINDOW GLASS (ONE) LEFT OR RIGHT - R.R Op. 7005A09 FRONT SIDE DOOR INTERIOR SUPPORT FRAME - R.R.1. Disconnect the electrical connection (1a) for the speaker (1b).

	Description	Connector
1a	SPEAKER IN LEFT FRONT DOOR	See P035 SPEAKER IN LEFT FRONT DOOR

	Description	Connector
1a	SPEAKER IN RIGHT FRONT DOOR	See P036 SPEAKER IN RIGHT FRONT DOOR

2. Disconnect the electrical connection (2a) for the window opening motor (2b).

	Description	Connector
2a	LEFT FRONT ELECTRIC WINDOW MOTOR	See N060 LEFT FRONT ELECTRIC WINDOW MOTOR

	Description	Connector
2a	RIGHT FRONT ELECTRIC WINDOW MOTOR	See N061 RIGHT FRONT ELECTRIC WINDOW MOTOR

1. Prise out the gaiter protecting the hole for passing the cable to the door exterior.2. Release the three electrical connections (2a, 2b, 2c) of the control unit (digital network node) (2d) on the door from their anchorages and disconnect.

	Description	Connector
2a	DRIVER''S DOOR CONTROL UNIT (NPG)	See M066 DRIVER'S DOOR CONTROL UNIT (NPG)

	Description	Connector
2b	DRIVER''S DOOR CONTROL UNIT (NPG)	See M066 DRIVER'S DOOR CONTROL UNIT (NPG)

	Description	Connector
2c	DRIVER''S DOOR CONTROL UNIT (NPG)	See M066 DRIVER'S DOOR CONTROL UNIT (NPG)

3. Release the four buttons securing the wiring to the support frame using the special tool.

Tool	Description	Function	Validity
1878077000	Knife	Retainer removal

1. Prise out the gaiter (1a) protecting the hole (1b) for passing the cable to the door interior.Withdraw and extract the wiring by passing the connectors through the holes

Refitting ( Removing

) - Check that the wiring is not damaged.- Place the wiring in position on the front door taking passing the connectors carefully through the openings.- Secure the four buttons fastening the wiring to the support frame.- Fit the gaiter protecting the hole for passing the cable to the door interior.- Connect the three door control unit electrical connections (digital network node) and secure with anchorages.

	Description	Connector
	DRIVER''S DOOR CONTROL UNIT (NPG)	See M066 DRIVER'S DOOR CONTROL UNIT (NPG)

- Fit the gaiter protecting the hole for passing the cable to the door exterior.- Connect the electrical connection for the windscreen wiper motor.

	Description	Connector
	LEFT FRONT ELECTRIC WINDOW MOTOR	See N060 LEFT FRONT ELECTRIC WINDOW MOTOR

	Description	Connector
	RIGHT FRONT ELECTRIC WINDOW MOTOR	See N061 RIGHT FRONT ELECTRIC WINDOW MOTOR

- Connect the electrical connection for the speaker.

	Description	Connector
	SPEAKER IN LEFT FRONT DOOR	See P035 SPEAKER IN LEFT FRONT DOOR

	Description	Connector
	SPEAKER IN RIGHT FRONT DOOR	See P036 SPEAKER IN RIGHT FRONT DOOR

Op. 7005A09 FRONT SIDE DOOR INTERIOR SUPPORT FRAME - R.R. Op. 7005D15 FRONT SIDE DOOR DESCENDING WINDOW GLASS (ONE) LEFT OR RIGHT - R.R Op. 7005E10 FRONT SIDE DOOR INTERIOR PANEL - R.R. Op. 7005M12 PASSENGER SIDE FRONT DOOR ELECTRICALLY OPERATED WINDOW SWITCH - R.R. Op. 7005M14 SWITCH UNIT ON DRIVER'S FRONT DOOR - R.R. Op. 7005E14 TOP COVER OF FRONT SIDE DOOR INNER PANEL - R R OR REPLACE Op. 7005E12 CORNER COVER FOR ONE FRONT SIDE DOOR, LH OR RH - R.R.- Connect the negative battery terminal.

	Description	Connector
	BATTERY	See A001 BATTERY