194000747 - 5540B61 <x>TURN SIGNAL BULB IN ONE GAS DISCHARGE LIGHT CLUSTER (ONE), LH OR RH - R&R</x>

Removing ( Refitting )     Op. 7040D30 ENGINE BAY FRONT BEAM COVER - R RIf the bulb that needs replacingit the one on the right side:    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.Proceed as follows for both bulbs:1. Undo the protective cover and remove it. 1. Rotate slightly to release the tabs from the bayonet fitting and extract the bulb holder (1a) and bulb (1b). Refitting ( Removing ) - Check the condition of the bulb and make sure it is clean; if necessary, replace it with a new one.- Fit the bulb in the bulb holder.- Place the bulb holder in position and rotate slightly to attach the bayonet fitting.- Place the cover in position and tighten it to close.If the operation has been carried out on the right side of the vehicle:    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.Proceed as follows for both sides:    Op. 7040D30 ENGINE BAY FRONT BEAM COVER - R R