194000808 - 5580C40 SIDE BAG SENSOR (ONE), LH OR RH - R.R.

Before removing and refitting the control unit the following preliminary operations must be carried out.

- Turn the ignition key to the OFF position and extract it.- Disconnect the negative and positive battery terminals and insulate them.- Wait for 10 minutes before continuing.

	Description	Connector
	BATTERY	See A001 BATTERY

FOLLOW ALL THE RECOMMENDED SAFETY INSTRUCTIONS    Op. 5580C AIR BAG SYSTEM

Removing ( Refitting )     Op. 7040L44 REAR DOOR RUNNING BOARD (ONE), LEFT OR RIGHT - R.R.    Op. 7040H36 CENTRE PILLAR LOWER ELEMENT (ONE), LEFT OR RIGHT - R.R1. Undo the fixing bolt (1a), release the reference pin (1b) and detach the side Air Bag sensor from the vehicle. 1. Disconnect the electrical connection (1a) and remove the side Air Bag sensor (1b) from the vehicle.

	Description	Connector
1a	SENSOR FOR DRIVER''S SIDE BAG	See K066 SENSOR FOR DRIVER'S SIDE BAG

	Description	Connector
1a	SENSOR FOR PASSENGER SIDE BAG	See K067 SENSOR FOR PASSENGER SIDE BAG

Refitting ( Removing ) - Check that the Side Bag sensor is not damaged.- Connect the electrical connection to the side Air Bag sensor.- Position the sensor for the side Air Bag correctly in its housing, attaching the reference pin, screw in the fixing bolt and tighten it to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
HEAD BAG RETAINING BAND TO BODYSHELL	Bolt	M6	0,64 ÷ 0,96

- Connect the electrical connection to the side Air Bag sensor.

	Description	Connector
	SENSOR FOR DRIVER''S SIDE BAG	See K066 SENSOR FOR DRIVER'S SIDE BAG

	Description	Connector
	SENSOR FOR PASSENGER SIDE BAG	See K067 SENSOR FOR PASSENGER SIDE BAG

    Op. 7040H36 CENTRE PILLAR LOWER ELEMENT (ONE), LEFT OR RIGHT - R.R    Op. 7040L44 REAR DOOR RUNNING BOARD (ONE), LEFT OR RIGHT - R.R.- Connect the negative and positive battery terminals.

	Description	Connector
	BATTERY	See A001 BATTERY

- Use an Examiner to check that the system has not acquired errors during the operation.