5580C44 FRONT SIDE BAG MODULE (ONE) LH OR RH - R.R - Fiat - CROMA - eLearn

194000809 - 5580C44 FRONT SIDE BAG MODULE (ONE) LH OR RH - R.R

) - Disconnect the negative battery terminal.

	Description	Connector
	BATTERY	See A001 BATTERY

Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R. Op. 7045A25 FRONT SEAT BACKREST LUMBAR ADJUSTMENT KNOB (ONE), LEFT OR RIGHT - R.R. Op. 7045B12 FRONT SEAT HEAD RESTRAINT, LEFT OR RIGHT - R.R. WITH FRONT SEAT REMOVED Op. 7045B06 GUIDE BUSH FOR FRONT SEAT HEAD RESTRAINT (ONE), LEFT OR RIGHT - R.R. Op. 7045D31 FRONT SEAT BACKREST COVER, LEFT OR RIGHT - R.R. WITH SEAT REMOVED1. Undo the nut (1a) for the earth and disconnect the electrical connection (1b).

	Description	Connector
1b	DRIVER''S SIDE BAG	See Q030 DRIVER'S SIDEBAG

	Description	Connector
1b	PASSENGER SIDE BAG	See Q031 PASSENGER SIDEBAG

1. Undo the nuts (1a) and remove the side Air Bag (1b).

Refitting ( Removing

) Observe the following precaution.

Handle the Air Bag module very carefully. Make sure that the battery is disconnected.

If a new module is being fitted, position the labels. Remove the detachable part of the adhesive label from the new module and place it in the special folder containing the vehicle details (model, registration date, chassis number) and the serial number of the old module. The file should be kept for future checks. A new adhesive plate comes together with the module and should be stuck on top of the existing one. Beforehand, however, it should be perforated at the month and 10 years after the year in which the module is being fitted (e.g. 2005 for 2015).

- Check that the air bag is not damaged.- Position the air bag and tighten the nuts.- Connect the electrical connection.

	Description	Connector
	DRIVER''S SIDE BAG	See Q030 DRIVER'S SIDEBAG

	Description	Connector
	PASSENGER SIDE BAG	See Q031 PASSENGER SIDEBAG

- Tighten the earth nut.- Connect the negative battery terminal.

	Description	Connector
	BATTERY	See A001 BATTERY