194000815 - ANTITHEFT DEVICE - GENERAL REMARKS
CONSTRUCTION SPECIFICATIONS
Before working on the electrical system (connectors, electrical components, wiring, etc.) turn the ignition key OFF and DISCONNECT THE BATTERY. |
CODE SYSTEM COMPONENT MANAGMENT
Code system parts management databaseThere is a centralized DATA BASE (for all markets) managed by the PARTS DIVISION for ordering all CODE system components.The production plant transfers all the necessary data into this data base together with the chassis number of the new vehicle.This data base is then used for ordering components that need replacing by the Dealer Network.The data base contains numerous pieces of information, such as:- vehicle chassis no.;- secret code;- code for each key (transponder identification);- remote control code;- mechanical key code;- programming date.If one of the CODE system components needs replacing and is being ordered, follow the procedure described below.Lost key/s1. Ask the Customer for all the remaining keys in their possession. They should also prove that they are the owner of the vehicle by producing the registration document and identification data.2. Carry out the KEY PROGRAMMING for the remaining keys using the Examiner or other diagnostic equipment. Keys which are not presented will never be able to be used again. A list of keys that are still valid will be printed out.3. Carry out the REMOTE CONTROL PROGRAMMING for the remaining remote controls using the Examiner or other diagnostic equipment. Keys which are not presented will never be able to be used again.4. Connect to the PARTS DIVISION giving the vehicle chassis no. and other information requested. Send an order using the V.O.R. procedure requesting one or more keys.5. By consulting the DATA BASE, the PARTS DIVISION is capable, through the chassis no., of producing a key which has:- the same shape (but indicating that it is a replacement).- a transponder with a new key code, but with the secret code for the CODE control of the vehicle in question;- the same mechanical code (metal insert).- new remote control code.The DATA BASE will be updated with the new code key entered.6. The PARTS DIVISION will send the key to the Dealer Network within 24 - 48 hours.7. Store the keys using the Examiner or other diagnostic equipment entering both the new key(s) and the previous one/s.8. Store the keys using the Examiner or other diagnostic equipment entering both the new key(s) and the previous one/s.the receiver PASSWORD must be entered to carry out this procedure. Ask the PARTS DIVISION for this password, always providing the chassis no. of the vehicle. |
A single cylinder or a kit with the mechanical key code only cannot be ordered. |
the receiver PASSWORD must be entered to carry out this procedure. Ask the PARTS DIVISION for this password, always providing the chassis no. of the vehicle. |