- With the bumper removed, perform the following operations at the bench:1. Disconnect electrical connection (1a) or (1b) or (1c) or (1d) from the relevant parking obstacle detection sensor.
2. Release the relevant parking obstacle detection sensor (2b) from anchorage clips (2a) and remove from the bumper.
Refitting
(
Removing
)
- Check that the sensor is not damaged.- Fir the parking obstacle detection sensor in its seat and secure with the anchorage clips.- Connect the electrical connection to the relevant parking obstacle detection sensor.
Removing
(
Refitting
)
- Turn the ignition key to the OFF position.- Disconnect the negative battery terminal.