194000825 - 5580P12 CONNECT PANEL REPLACE

Removing ( Refitting ) - Turn the ignition key to the OFF position.- Disconnect the negative battery terminal.
DescriptionConnector
BATTERY    See A001 BATTERY
1. Fit the extractors (1a) into the slots ont eh trim and remove Connect panel (1b), taking care with the electrical wiring on the rear.
ToolDescriptionFunctionValidity
1875088000Extractor/DriftExtractor2.2
1. Disconnect electrical connection (1a), radio aerial connection (1b) and GPS aerial (1c). Then release the GSM phone aerial wiring from retaining clip (1d) and disconnect electrical connection (1e).
DescriptionConnector
1RADIO    See P020
1. Turn the Connect panel and disconnect the electrical connections (1a), (1b), (1c), (1d), (1e).
DescriptionConnector
1aRADIO    See P020
DescriptionConnector
1bRADIO    See P020
DescriptionConnector
1cRADIO    See P020
DescriptionConnector
1dRADIO    See P020
DescriptionConnector
1eRADIO    See P020
1. Remove the Connect panel from the vehicle.
Refitting ( Removing ) - Check that the Connect panel is not damaged.- Connect the electrical connections and the connections for the aerials.
DescriptionConnector
RADIO    See P020
- Secure the GSM phone aerial in the retaining clip.- Place the Connect panel in position taking great care and avoiding any interference with the cables at the back. If there is interference, check that the cables are correctly positioned.- Connect the negative battery terminal.
DescriptionConnector
BATTERY    See A001 BATTERY
- Check the operation of the Connect panel.