194000870 - 7005E50 FRONT SIDE DOOR PILLAR TRIM (ONE) LH OR RH - R.R.

Removing ( Refitting ) - Open the front side door.- Completely lower the window.- Turn the ignition key to the OFF position.- Disconnect the negative battery terminal.
DescriptionConnector
BATTERY    See A001 BATTERY
1. Release the corner cover using the special tool without removing it and without disconnecting the tweeter electrical connection.
ToolDescriptionFunctionValidity
1878077000KnifeRetainer removal
2. Undo the fixing bolts and move the exterior rear view mirror to free up the work area.
    Op. 7005D26 FRONT SIDE DESCENDING WINDOW GLASS SCRAPER (OUTER) (ONE), LEFT OR RIGHT- R.R1. Release the outer casing (1a) as necessary and the lowering window channel (1b) from its housing until the pillar trim fixing bolts are accessible.2. Undo the fixing bolts (2a) and remove the door pillar trim (2b).
Refitting ( Removing ) - Fit the door pillar trim in place.- Tighten the retaining bolts.- Fit the lowering window channel checking that it adheres perfectly to the seat.- Fit the outer casing in position.    Op. 7005D26 FRONT SIDE DESCENDING WINDOW GLASS SCRAPER (OUTER) (ONE), LEFT OR RIGHT- R.R- Position the door mirror and tighten the fixing bolts.- Fit the corner cover pressing in the areas of the retainers.- Connect the negative battery terminal.
DescriptionConnector
BATTERY    See A001 BATTERY