194001075 - 7040L20 TUNNEL COVER - R.R

Removing ( Refitting ) - Turn the ignition key to the OFF position.- Disconnect the negative and positive battery terminals.    See A001 BATTERY(Both)    Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.    Op. 5010C32 AIR VENT ON TUNNEL COVER FOR REAR SEATS - R.R.    Op. 7040L28 TUNNEL SWITCH PANEL - R R    Op. 5520A10 IGNITION SWITCH ASSEMBLY - R+R1. Undo the front bolts (1a) on both sides fixing the tunnel cover (1b). 1. Undo the inner bolt (1a) fixing the tunnel cover (1b). 1. Undo the rear hexagonal head bolts (1a) fixing the tunnel cover (1b). 1. Remove the tunnel cover from the vehicle. Refitting ( Removing ) - Check that the tunnel cover is not damaged.- Place the cover in position and tighten the fixing bolts.    Op. 5520A10 IGNITION SWITCH ASSEMBLY - R+R    Op. 7040L28 TUNNEL SWITCH PANEL - R R    Op. 5010C32 AIR VENT ON TUNNEL COVER FOR REAR SEATS - R.R.(Both)    Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.- Reconnect the negative and positive battery terminals.    See A001 BATTERY