194001087 - 7045A23 SUPPORT/GUIDE FOR FRONT SEAT, LEFT OR RIGHT - R.R.

Removing ( Refitting ) - Raise the seat completely and slide it forwards into the end of travel position.- Turn the ignition key to the OFF position.- Disconnect the negative and positive battery terminals.

	Description	Connector
	BATTERY	See A001 BATTERY

    Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R.    Op. 7040L41 RIGHT FRONT DOOR COMPARTMENT SILL PLATE RR    Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.    Op. 7040L28 TUNNEL SWITCH PANEL - R R    Op. 5010C32 AIR VENT ON TUNNEL COVER FOR REAR SEATS - R.R.    Op. 5520A10 IGNITION SWITCH ASSEMBLY - R+R    Op. 7040L20 TUNNEL COVER - R.R    Op. 5010B58 DUCT BETWEEN CLIMATE CONTROL UNIT HOUSING AND AIR DUCT TO REAR SEATS (ONE), LH OR RH - R&R1. Raise the mat on the rear side (1a) and the mat at the front (1b), releasing from the air duct outlets for the rear seats. 1. Us an appropriate tool to prise up both plates (1a) anchoring the air duct to the rear seats (1b), remove the air duct from the vehicle.

Tool	Description	Function	Validity
1878077000	Knife	Retainer removal

1. Undo nuts (1a) securing the electrical connector (1b) and disconnect the connector.2. Prise up and disconnect connector (2a).

	Description	Connector
1b	DRIVER''S SEAT COUPLING	See D070 DRIVER'S SEAT COUPLING

	Description	Connector
2a	PASSENGER SEAT COUPLING	See D071 PASSENGER SEAT COUPLING

1. Undo the eight bolts (1a) fixing the seat mount/guide (1b) to the floorpan and remove the mount from the vehicle. Refitting ( Removing ) - Check that the seat mount/guide is not damaged.- Place the seat mount/guide in position in the vehicle.- Tighten the eight bolts anchoring the seat mount/guide to the floorpan and tighten to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
FRONT SEATS TO FRAME	Bolt	M10	3,6 ÷ 4,4

Component	Fastening	dia	Value (daNm)	Validity
FRONT SEATS TO FRAME	Bolt	M10	3,6 ÷ 4,4

- Fit and attach the seat junction electrical connector the sea mount/guide.- Attach the electrical connector to the seat mount/guide and tighten the nuts.

	Description	Connector
	DRIVER''S SEAT COUPLING	See D070 DRIVER'S SEAT COUPLING

	Description	Connector
	PASSENGER SEAT COUPLING	See D071 PASSENGER SEAT COUPLING

- Position the air duct for the rear seats on the vehicle and tighten both anchorage plates.- Lower the mat at the front, inserting both air duct outlets for the rear seats in the slots.- Lower the mat at the rear of the floor pan.    Op. 5010B58 DUCT BETWEEN CLIMATE CONTROL UNIT HOUSING AND AIR DUCT TO REAR SEATS (ONE), LH OR RH - R&R    Op. 7040L20 TUNNEL COVER - R.R    Op. 5520A10 IGNITION SWITCH ASSEMBLY - R+R    Op. 5010C32 AIR VENT ON TUNNEL COVER FOR REAR SEATS - R.R.    Op. 7040L28 TUNNEL SWITCH PANEL - R R    Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.    Op. 7040L41 RIGHT FRONT DOOR COMPARTMENT SILL PLATE RR    Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R.- Reconnect the negative and positive battery terminals.

	Description	Connector
	BATTERY	See A001 BATTERY

- Reposition the seat.