194001104 - 7045A67 SLIDING GUIDE (ONE), LEFT OR RIGHT FOR FRONT SEAT - R.R WITH SEAT REMOVED (ELECTRIC SEATS)
Removing
(
Refitting
)
VALID FOR OUTER GUIDE ONLY Op. 7045A63 FRONT SEAT GUIDE OUTER GUARD (ONE), LH OR RH - R RVALID FOR INNER GUIDE ONLY1. Rotate the mechanism (1a) and release the end (1b) of the cable.2. Rotate the end (2a) so that the retaining tabs (2b) are aligned with the slots (2c), press the retaining tabs and release the end from the bracket (2d).
Refitting
(
Removing
)
- Position the release device on the sliding guide and tighten the bolts. | When fitting the sliding guide to the seat, insert the guide connection bar in the release device. |
| In the absence of the manual device for adjusting driver''s seat tilt, position the seat front bracket (1a) on the sliding guide threaded pins (1b). |
Removing
(
Refitting
)
VALID FOR OUTER GUIDE ONLY Op. 7045A63 FRONT SEAT GUIDE OUTER GUARD (ONE), LH OR RH - R RVALID FOR BOTH1. Unscrew nuts (1a) recovering the underlying washers, unscrew bolt (1b) and remove sliding guide (1c) from the seat.- For the inner guide, after unscrewing the nuts at the front, recover the pretensioner reaction bracket.
Refitting
(
Removing
)
- Fit the sliding guide to the seat and tighten the nuts.- For the inner guide, fit the pretensioner reaction bracket at the front.VALID FOR OUTER GUIDE ONLY Op. 7045A63 FRONT SEAT GUIDE OUTER GUARD (ONE), LH OR RH - R R