194001117 - 7045J34 FRONT SEAT BACKREST ANGLE MOTOR, LEFT OR RIGHT - R.R. FOLLOWING ELECTRICAL WIRING CHECK

Removing ( Refitting ) - Open the front side door.- Turn the ignition key to the OFF position.- Disconnect the negative battery terminal.

	Description	Connector
	BATTERY	See A001 BATTERY

    Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R.    Op. 7045A43 FRONT SEAT EXTERIOR GUARD (ONE), LEFT OR RIGHT - R.R    Op. 7045A44 FRONT SEAT INTERIOR GUARD (ONE), LEFT OR RIGHT - R.R1. Release the retaining clip (1a) and electrical connection (1b).

	Description	Connector
1b	DRIVER''S SEAT BACKREST ADJUSTMENT MOTOR	See N132 DRIVER'S SEAT BACKREST ADJUSTMENT MOTOR

	Description	Connector
1b	PASSENGER SEAT BACKREST ADJUSTMENT MOTOR	See N135 PASSENGER SEAT BACKREST ADJUSTMENT MOTOR

2. Working below the seat, withdraw retaining ring (2a) and remove motor (2b). Refitting ( Removing )

When refitting the motor, apply a counterforce to the shaft from the opposite side when attaching the retaining spring.

- Position the motor and fit the retaining ring.- Connect the electrical connection and insert the retaining spring.

	Description	Connector
	DRIVER''S SEAT BACKREST ADJUSTMENT MOTOR	See N132 DRIVER'S SEAT BACKREST ADJUSTMENT MOTOR

	Description	Connector
	PASSENGER SEAT BACKREST ADJUSTMENT MOTOR	See N135 PASSENGER SEAT BACKREST ADJUSTMENT MOTOR

- Check that the motor is not damaged.    Op. 7045A44 FRONT SEAT INTERIOR GUARD (ONE), LEFT OR RIGHT - R.R    Op. 7045A43 FRONT SEAT EXTERIOR GUARD (ONE), LEFT OR RIGHT - R.R    Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R.- Connect the negative battery terminal.

	Description	Connector
	BATTERY	See A001 BATTERY