194001119 - 7045J50 DRIVER''S SIDE FRONT SEAT POSITION MEMORISATION SYSTEM ECU - R+R FOLLOWING ELECTRICAL WIRING CHECK

Removing ( Refitting ) - Open the front side door.- Turn the ignition key to the OFF position.- Disconnect the negative battery terminal.
DescriptionConnector
BATTERY    See A001 BATTERY
    Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R.    Op. 7045A43 FRONT SEAT EXTERIOR GUARD (ONE), LEFT OR RIGHT - R.R1. Disconnect the electrical connections (1a) and (1b).
DescriptionConnector
1aDRIVING POSITION NODE    See M173 DRIVE ALIGNMENT NODE
DescriptionConnector
1bDRIVING POSITION NODE    See M173 DRIVE ALIGNMENT NODE
DescriptionConnector
1aPASSENGER POSITION NODE    See M175 PASSENGER ALIGNMENT NODE
DescriptionConnector
1bPASSENGER POSITION NODE    See M175 PASSENGER ALIGNMENT NODE
2. Undo the bolts (2a) and remove the control unit (2b) from external guard (2c).
Refitting ( Removing ) - Check that the control unit is not damaged.- Position the control unit in the external guard and tighten the bolts.- Connect the electrical connections to the control unit.
DescriptionConnector
DRIVING POSITION NODE    See M173 DRIVE ALIGNMENT NODE
DescriptionConnector
PASSENGER POSITION NODE    See M175 PASSENGER ALIGNMENT NODE
    Op. 7045A43 FRONT SEAT EXTERIOR GUARD (ONE), LEFT OR RIGHT - R.R    Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R.- Connect the negative battery terminal.
DescriptionConnector
BATTERY    See A001 BATTERY