1. Undo the nut (1a) fixing the retainer and the bolts (1b) securing the wheel arch liner to the inner edge of the wing on the bumper.2. Using the special tool, release the three retaining buttons (2a) and the wheel arch retainer (2b).
Tool
Description
Function
Validity
1878077000
Knife
Retainer removal
- Remove the rear wheel arch liner from the vehicle.
Refitting
(
Removing
)
- Check that the wheel arch liner is not damaged.- Place the wheel arch in position, fit the three buttons and the retainer.- Tighten the twelve nuts fixing it to the bodyshell.- Tighten the three bolts securing the wheel arch to the inner edge of the wing on the bumper. Op. 4450B06 LEFT REAR WHEEL - R.R
Removing
(
Refitting
)
Op. 4450B06 LEFT REAR WHEEL - R.R1. Undo the nuts fixing the wheel arch liner to the bodyshell.
