194001191 - 7065A34 PASSENGER PRESENCE SENSOR ON FRONT SEAT FOR INDICATING SEATBELT UNFASTENED R R

Removing ( Refitting ) - Open the front side door.- Turn the ignition key to the OFF position.- Disconnect the negative battery terminal.    Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R.1. Cut the retaining bands (1a), using the special tool release the retaining buttons (1b) and release the wiring (1c).

Tool	Description	Function	Validity
1878077000	Knife	Retainer removal

1. Cut the retaining band (1a), lift up the locking tab (1b) and release the cover (1c). 1. Pressing on the side shown by the arrow, release the electrical connection (1a) and release it from the coupling (1b).

	Description	Connector
1a	PASSENGER PRESENCE SENSOR	See K065 PASSENGER PRESENCE SENSOR

1. Release the cushion cover on three sides.2. Cut the rings at the retaining points (2a) necessary to lift up the cover (2b) as illustrated.3. Carefully detach the heater pad from the cushion. 1. Raise the heater pad (1a), detach the presence sensor (1b) carefully from the cushion and remove it releasing the wiring. Refitting ( Removing ) 1. Introduce the wiring in the opening in the cushion upholstery and attach the presence sensor as illustrated. - Position the heater pad, position the cover on the upholstery and, using the special tool, attach the retaining rings between the cover and upholstery.

Tool	Description	Function	Validity
1878017001	Pliers for metal points	Fitting new backrest cover retaining rings

- Fit the lower parts of the cover to the seat frame.- Fit the the electrical connection for the presence sensor to the coupling.

	Description	Connector
	PASSENGER PRESENCE SENSOR	See K065 PASSENGER PRESENCE SENSOR

- Fit the retaining buttons on the bracket under the seat.- Fit new retaining bands on the wiring.    Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R.