194001937 - 5020M60 FLEXIBLE PIPING FOR COOLANT EXITING FROM ADDITIONAL SELF-STANDING HEATER UNIT - R R

With the engine cold, open the engine coolant expansion tank by undoing the cap to compensate for the difference in pressure in the system.
- Have a suitable container ready for collecting the residual engine coolant. Removing ( Refitting ) - Turn the ignition key to the OFF position.- Disconnect the negative battery terminal.
DescriptionConnector
BATTERY    See A001 BATTERY
    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.    Op. 0010T20 ENGINE COOLANT - CHANGE    Op. 1016A10 SOUND-PROOFING COVER - R.R1 Loosen the retaining band (1a) and disconnect the flexible coolant outlet pipe (1b) from the additional independent heater unit (1c).
1. Release the flexible coolant outlet pipe (1b) from the additional heater from the mounting clip (1a).
1. Release the flexible coolant outlet pipe (1b) from the additional heater from the mounting clip (1a).2. Loosen the retaining band and disconnect the flexible pipe from the thermostat unit.
Refitting ( Removing ) - Connect flexible pipe to the thermostat unit and tighten the retaining band.- Attach the flexible pipe to the retaining clips.- Connect the flexible coolant outlet pipe to the additional heater unit and tighten the securing band.    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.- Attach the flexible pipe to the retaining clip.    Op. 1016A10 SOUND-PROOFING COVER - R.R- Connect the negative battery terminal.
DescriptionConnector
BATTERY    See A001 BATTERY
    Op. 0010T20 ENGINE COOLANT - CHANGE