194002171 - 1060F10 FUEL INJECTORS - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 1016A10 SOUND-PROOFING COVER - R.R- Disconnect the electrical connections from the injectors.

	Description	Connector
-	Injector	See N070 INJECTOR

    Op. 1060F36 PIPES (ALL) FROM FUEL MANIFOLD TO INJECTOR - R.R.1. Undo the injector bracket retaining nuts.2. Remove the injectors (2a) complete with brackets using the tool (2b).

If a new injector/new inectors are fitted:- determine the identification code stamped on the top surface;- check, using an Examiner, the the new injector(s) is (are) recognized by the engine management control unit.

Start the removal beginning with the injector for cylinder no. 1 and continue with the injectors for cylinders 2, 3 and 4.

Tool	Description	Function	Validity
1870897300	Extractor	Removing injectors	1.9 JTD 8V1.9 JTD 16V2.4 JTD 20V

Refitting ( Removing ) - Refit the injectors complete with brackets and tighten nuts to the specified torque.

Start refitting beginning with the injector for cylinder no. 4 and continue with the injectors for cylinders 3, 2 and 1.

Component	Fastening	dia	Value (daNm)	Validity
Injector brackets	Nut	M8	(cylinder head extension side) 2.3 - 2.8	1.9 JTD 16v2.4 JTD 20v

    Op. 1060F36 PIPES (ALL) FROM FUEL MANIFOLD TO INJECTOR - R.R.- Connect the electrical connections to the injectors.    Op. 1016A10 SOUND-PROOFING COVER - R.R- Remove the vehicle from the lift.