2135B52 ELECTRONIC AUTOMATIC TRANSMISSION ELECTRIC CIRCUIT -ECU MOUNT R R (AUTOMATIC TRANSMISSION) - Fiat - CROMA - eLearn

194002338 - 2135B52 ELECTRONIC AUTOMATIC TRANSMISSION ELECTRIC CIRCUIT -ECU MOUNT R R (AUTOMATIC TRANSMISSION)

) Op. 5530B10 BATTERY - R+R Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R- Move the gear selector to position "N".1. Loosen the band and disconnect the coolant return pipe to the engine coolant reservoir, reservoir side, and move aside.

1. Loosen collar (1a), unscrew bolts (1b) and remove the air delivery pipe from the turbocharger air-air heat exchanger to the throttle body (1c).

1. Disconnect the electrical connector from the electronic automatic transmission system control unit.

	Description	Connector
1	Automatic transmission control unit	See M055 AUTOMATIC TRANSMISSION CONTROL UNIT

2. Release the electrical wiring from the fastenings and move aside.

1. Disconnect the gear selection cable from the gear selector and reaction bracket.

1. Undo nut (1a) and remove lever (1b) from the gear selector on the automatic transmission.2. Undo the bolts (2a) and remove the electronic automatic transmission control unit (2b).

Refitting ( Removing

) - Place the control unit for the electronic automatic transmission in its housing and secure it by tightening the bolts to the specified torque.

Component	Fastening	dia	Value (daNm)	Validity
Electronic automatic transmission system control unit	Bolt	-	(automatic gearbox side) 2.5	1.9 JTD 16v CAE2.4 JTD 20v CAE

- Place the lever in position on the gear selector and secure it tightening the nut to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Gear selection lever	Nut		(gear selector side) 1.4 - 1.8	1.9 JTD 16v CAE2.4 JTD 20v CAE

- Connect the gear selector cable to the gear selector and to the bracket.- Refit the electrical wiring in its seat and secure.- Connect the electrical connections to the electronic automatic transmission control unit.- Refit the turbocharger air-air heat exchanger air delivery pipe to the throttle body in its seat, then secure with the bolts and collar.- Connect the coolant return pipe to the engine coolant supply reservoir, radiator side and tighten the band. Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R Op. 5530B10 BATTERY - R+R- Connect an Examiner and run the self-learning procedure.