194002347 - 4450B93 REAR TYRES PRESSURE TRANSMITTER, (ONE) LH OR RH - R R

Removing ( Refitting )
DescriptionConnector
BATTERY    See A001 BATTERY
    Op. 4450B06 LEFT REAR WHEEL - R.R1. Undo the nut (1b) fixing the retainer and the bolts (1a) securing the wheel arch liner to the inner edge of the wing on the bumper.2. Using the special tool, release the three retaining buttons (2a) and the wheel arch retainer (2b) and partly detach it.
ToolDescriptionFunctionValidity
1878077000KnifeRetainer removal
1. Disconnect the electrical connection for the rear tyre pressure sender unit.
DescriptionConnector
TYRE PRESSURE CONTROL UNIT AERIAL    See P012 TYRE PRESSURE CONTROL UNIT ANTENNA
2.Undo the bolts (2a) and remove the control unit (2b).
Refitting ( Removing ) - Check that the rear tyre pressure sender unit is not damaged.- Fit the rear tyre pressure sender unit in place and tighten the twp fixing bolts.- Connect the electrical connection.
DescriptionConnector
1TYRE PRESSURE CONTROL UNIT AERIAL    See P012 TYRE PRESSURE CONTROL UNIT ANTENNA
- Fit the wheel arch.- Fit the three retaining buttons.- Tighten the fixing nut and bolts.    Op. 4450B06 LEFT REAR WHEEL - R.R
DescriptionConnector
BATTERY    See A001 BATTERY
- Carry out the self-learning procedure for the tyre pressure sender unit (LF sender unit) using the Examiner.