3340B53 RIGID PIPE (ONE) FROM MASTER CYLINDER (PUMP) TO ABS HYDRAULIC CONTROL UNIT - R.R. FOR RIGHT HAND DRIVE VERSIONS - Fiat - CROMA - eLearn

194004024 - 3340B53 RIGID PIPE (ONE) FROM MASTER CYLINDER (PUMP) TO ABS HYDRAULIC CONTROL UNIT - R.R. FOR RIGHT HAND DRIVE VERSIONS

) - Position the vehicle on a lift. Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. Op. 1016A10 SOUND-PROOFING COVER - R.R Op. 5530B10 BATTERY - R+R Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R- Replace the brake-clutch fluid reservoir plug using the tool.

Tool	Description	Function	Validity
2000001400	Plug	Brake/clutch fluid reservoir cap

1. Remove the engine coolant supply reservoir from the bracket without disconnecting the pipes.

Op. 1044B10 FUEL FILTER ASSEMBLY - R + R OR REPLACE Op. 5520C20 HEATER PLUGS CONTROL UNIT - R.R1. Undo the connector (1a) and disconnect the rigid pipe from the master cylinder to the A.B.S.hydraulic control unit (1b), hydraulic control unit side.

1. Undo the connector (1a) and disconnect the rigid pipe from the master cylinder to the A.B.S.hydraulic control unit (1b), master cylinder side.

- Remove the rigid pipe from the master cylinder to the ABS hydraulic control unit after releasing it from the clips.

Refitting ( Removing

) - Place the rigid pipe from the master cylinder to the A.B.S. hydraulic control unit in its housing and tighten the connectors to the recommended torque.- Connect the rigid pipe from the master cylinder to the A.B.S. hydraulic control unit, master cylinder side and tighten the connector to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Brake pipe connectors	Connector	M10/M12	1.4 ÷ 1.8

- Connect the rigid pipe from the master cylinder to the A.B.S. hydraulic control unit, hydraulic control unit side and tighten the connector to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Brake pipe connectors	Connector	M10/M12	1.4 ÷ 1.8

Op. 5520C20 HEATER PLUGS CONTROL UNIT - R.R Op. 1044B10 FUEL FILTER ASSEMBLY - R + R OR REPLACE- Place the engine coolant tank back in its housing on the bracket.- Support the tool with the brake-clutch fluid reservoir plug.

Tool	Description	Function	Validity
2000001400	Plug	Brake/clutch fluid reservoir cap

Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R Op. 5530B10 BATTERY - R+R Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R. Op. 1016A10 SOUND-PROOFING COVER - R.R- Remove the vehicle from the lift.