194000883 - 7005R30 ELECTRICALLY CONTROLLED DOOR MIRROR (ONE) - R+R

Removing ( Refitting ) - Open the front side door.- Turn the key OFF and disconnect the battery negative terminal
DescriptionConnector
BATTERY    See A001 BATTERY
    Op. 7005E10 FRONT SIDE DOOR INTERIOR PANEL - R.R.1. Disconnect the electrical connection from the door node mirror.
DescriptionConnector
1DRIVER''S DOOR CONTROL UNIT (NPG)    See M066 DRIVER'S DOOR CONTROL UNIT (NPG)
DescriptionConnector
1PASSENGER SIDE DOOR JUNCTION UNIT (NPP)    See M067 PASSENGER DOOR CONTROL UNIT (NPP)
1. Using the special tool, prise up the electrical wiring retaining clips.
ToolDescriptionFunctionValidity
1878077000KnifeRetainer removal
2. Undo the fixing bolt (2a), lift seal (2b) and unscrew bolt (2c).3. Remove the door mirror, carefully withdrawing the electrical wiring.
Refitting ( Removing ) - Position the door mirror and secure with the bolts after restoring the route of the electrical wiring.- Fit the electrical wiring retaining spring.- Connect the mirror electrical connection to the door node.
DescriptionConnector
DRIVER''S DOOR CONTROL UNIT (NPG)    See M066 DRIVER'S DOOR CONTROL UNIT (NPG)
DescriptionConnector
PASSENGER SIDE DOOR JUNCTION UNIT (NPP)    See M067 PASSENGER DOOR CONTROL UNIT (NPP)
    Op. 7005E10 FRONT SIDE DOOR INTERIOR PANEL - R.R.- Connect the negative battery terminal.
DescriptionConnector
BATTERY    See A001 BATTERY