194001137 - 7045M32 ELECTRONIC THERMOSTAT FOR HEATING CIRCUIT OF ONE FRONT SEAT, LH OR RH R R

Removing ( Refitting ) - Open the front side door.- Turn the ignition key to the OFF position.- Disconnect the negative battery terminal.

	Description	Connector
	BATTERY	See A001 BATTERY

    Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R.1. Release the retainers and lift up the backrest cover (1a), release the cushion cover (1b) from the seat frame.2. Cut the retaining bands (2a) and release the support (2b) from the seat frame.3. Disconnect the electrical connection for the electronic thermostat (3a) and remove the electronic regulator (3b) releasing it from the support as shown by the arrow.

	Description	Connector
3a	DRIVER''S FRONT SEAT HEATER CONTROL UNIT	See M170 DRIVE SIDE FRONT PASSENGER SEAT HEATER CONTROL UNIT

	Description	Connector
3a	PASSENGER FRONT SEAT HEATER CONTROL UNIT	See M110 FRONT PASSENGER SEAT HEATER CONTROL UNIT

Refitting ( Removing ) - Check the operation of the electronic regulator.- Fit the electronic thermostat on the mounting and connect the electrical connection.

	Description	Connector
	DRIVER''S FRONT SEAT HEATER CONTROL UNIT	See M170 DRIVE SIDE FRONT PASSENGER SEAT HEATER CONTROL UNIT

	Description	Connector
	PASSENGER FRONT SEAT HEATER CONTROL UNIT	See M110 FRONT PASSENGER SEAT HEATER CONTROL UNIT

- Fit the support on the seat frame and fit new retaining bands.- Fit the cushion cover to the frame and attach the retainers for the backrest cover.    Op. 7045A10 FRONT SEAT (ONE), LEFT OR RIGHT - R.R.- Connect the negative battery terminal.

	Description	Connector
	BATTERY	See A001 BATTERY