194002139 - 1024B20 ENGINE FLYWHEEL - R + R FOR VERSIONS WITH AUTOMATIC TRANSMISSION (AUTOMATIC TRANSMISSION)

Removing ( Refitting )     Op. 2130A10 AUTOMATIC TRANSMISSION - R + R
On this vehicle in order to remove-refit the automatic transmission, the power unit must be removed-refitted.
    Op. 1004B14 POWER UNIT WITH AUTOMATIC TRANSMISSION R + R
and then separated at the bench.
    Op. 1004D20 POWER UNIT (AUTOMATIC TRANSMISSION) REMOVED, REMOVE AND RE-BUILD
The latter operation includes removal/refitting of the automatic gearbox.
1. Fit the flywheel lock.
ToolDescriptionFunctionValidity
1860846000Counter-torqueFlywheel lock
2. Undo the bolts (2a) and remove the engine flywheel (2b).
Refitting ( Removing ) - Place the flywheel in its housing and secure it by tightening the new bolts to the recommended torque.
ComponentFasteningdia  Value (daNm)Validity
Engine flywheelBolt (pretreated to be replaced)M12x1.25(crankshaft side) ..................1.9 JTD 16v CAE2.4 JTD 20v CAE
- Remove the flywheel lock.
ToolDescriptionFunctionValidity
1860846000Counter-torqueFlywheel lock
    Op. 2130A10 AUTOMATIC TRANSMISSION - R + R