194000236 - 1008B10 POWER UNIT FRONT SUPPORT FLEXIBLE MOUNTING (TIMING SIDE) - REPLACE
Removing
(
Refitting
)
- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-). Op. 1016A10 SOUND-PROOFING COVER - R.R Op. 1048A10 AIR FILTER ASSEMBLY - R.R.- Position a hydraulic jack under the engine crankcase sump.1. Undo the bolts (1a), (1b) and the nut (1c) and remove the flexible mounting for the timing side power unit front support (1d).
Refitting
(
Removing
)
1. Place the timing power unit front support flexible mounting (1a) in its housing and secure it tightening the bolts (1b) and (1c) and the nut (1d) to the recommended torque.| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Timing side power unit rigid support flexible mounting | Bolt | M10 | (bodyshell side) 5.0 - 6.0 |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Timing side power unit rigid support flexible mounting | Bolt | M12 | (rigid support side) 7.5 - 8.5 | 2.4 JTD 20V |
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Timing side power unit rigid support flexible mounting | Nut | M10 | (bodyshell side) 5.0 - 6.0 |
