194000299 - 1044B10 FUEL FILTER ASSEMBLY - R + R OR REPLACE

Removing ( Refitting ) - Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).
DescriptionConnector
-Battery    See A001 ALARM DOES NOT COME ON
1. Disconnect the rapid connectors from the fuel filter, fuel filter side.2. Unscrew nut (2a) and open fuel filter bracket (2b).3. Raise the fuel filter assembly (3a) by the required amount and disconnect the electrical connection (3b) from the water presence sensor, then remove.
DescriptionConnector
3bWater in diesel filter sensor    See K101 FUEL TEMPERATURE AND WATER IN FUEL FILTER SENSOR
1. Working at the bench, unscrew the water presence sensor in the fuel filter and remove.
Refitting ( Removing ) - Refit the water sensor in its seat on the fuel filter.- Connect the electrical connection to the water presence sensor, then refit the fuel filter assembly in its seat.- Secure with fuel filter with its bracket and tighten the nut.- Connect the rapid connectors, fuel filter side.- Connect the negative battery terminal.