194000337 - 1060G28 FUEL PRESSURE SENSOR ON FUEL MANIFOLD TO INJECTORS - R.R

Removing ( Refitting ) - Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 BATTERY

    Op. 1016A10 SOUND-PROOFING COVER - R.R1. Undo the bolts (1a) and move the vacuum pipes (1b) sideways. 1. Disconnect the electrical connection from the fuel pressure sensor on the fuel manifold.

	Description	Connector
1	Fuel pressure sensor	See K083 FUEL PRESSURE SENSOR

2. Undo the pressure sensor from the fuel manifold and remove it. Refitting ( Removing ) - Place the fuel pressure sensor in position on the fuel manifold and tighten it to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Fuel pressure sensor	-	M..........	(fuel manifold side) 6.5 - 7.5	1.9 JTD 16v2.4 JTD 20v

- Connect the electrical connection to the fuel pressure sensor on the fuel manifold.- Place the vacuum pipes in their housings and secure them using the bolts.    Op. 1016A10 SOUND-PROOFING COVER - R.R- Connect the negative battery terminal.