194000339 - 1060G31 FUEL PRESSURE REGULATOR ON SINGLE MANIFOLD TO INJECTORS - R R

Removing ( Refitting ) - Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 BATTERY

    Op. 1016A10 SOUND-PROOFING COVER - R.R1. Disconnect the electrical connection from the fuel pressure regulator on the injector single manifold.

	Description	Connector
1	Water in diesel filter sensor	See K031 WATER IN DIESEL FILTER SENSOR

2. Undo the fuel pressure regulator on the single manifold to the injectors and remove it.

Lock the regulator using a spanner whilst undoing the nut fixing it to the manifold.

Refitting ( Removing ) - Place the fuel pressure regulator on the single manifold to the injectors back in its housing and tighten it to the recommended torque.

Lock the regulator using a spanner whilst tightening the nut fixing it to the manifold.

Component	Fastening	dia	Value (daNm)	Validity
Fuel pressure regulator on single manifold to injectors	-	M..........	(fuel manifold side) 8.0 - 9.0	1.9 JTD 16v2.4 JTD 20v

- Connect the electrical connection to the fuel pressure regulator on the injector single manifold.    Op. 1016A10 SOUND-PROOFING COVER - R.R- Connect the negative battery terminal.