194000716 - 5530A30 ALTERNATOR PULLEY OR FAN - R+R WITH ALTERNATOR REMOVED

Removing ( Refitting ) 1. Place the alternator in a vice, as shown in the diagram.2. Position the tool (2a) with a recessed hexagonal reference on the hexagonal catch (2b).
ToolDescriptionFunctionValidity
2000013800Tool with hexagonal markAlternator pulley extraction
1. Fit the ribbed bush tool (1a) in the housing (1b).
ToolDescriptionFunctionValidity
1870785000Multi-tooth spannerRemoving-refitting alternator pulley
1. Using the reaction tool (1a) and a spanner (1b), undo the pulley (1c) (left hand thread).
ToolDescriptionFunctionValidity
1854014000Reaction spannerAlternator pulley extraction
Refitting ( Removing ) - Check that the pulley is not damaged.- Tighten the pulley in place (left hand thread).- Using the tools and a torque wrench, tighten the pulley to the recommended torque.
ToolDescriptionFunctionValidity
2000013800Tool with hexagonal markAlternator pulley extraction
ToolDescriptionFunctionValidity
1870785000Multi-tooth spannerRemoving-refitting alternator pulley
ToolDescriptionFunctionValidity
1854014000Reaction spannerAlternator pulley extraction
ComponentFasteningdia  Value (daNm)Validity
Alternator pulley--0.85