194000820 - 5580H06 WIRING FOR PARKING SENSOR SYSTEM - R.R

Removing ( Refitting ) - Turn the ignition key to the OFF position.- Disconnect the negative battery terminal.
DescriptionConnector
BATTERY    See A001 BATTERY
    Op. 7210E66 R.R. REAR BUMPER1. Disconnect the electrical connection of the parking sensor wiring.
DescriptionConnector
1PARKING SENSOR COUPLING    See D089 PARKING SENSOR COUPLING
1. Disconnect the electrical connectors (1a), (1b), (1c), (1d) from the parking sensors.
DescriptionConnector
1aPARKING SENSOR UNIT    See K097 PARKING SENSORS
DescriptionConnector
1bPARKING SENSOR UNIT    See K097 PARKING SENSORS
DescriptionConnector
1cPARKING SENSOR UNIT    See K097 PARKING SENSORS
DescriptionConnector
1dPARKING SENSOR UNIT    See K097 PARKING SENSORS
1. Remove the parking sensor system wiring (1a) from retaining collars (1b).
Refitting ( Removing ) - Check that the wiring is not damaged and that the individual conducts are correctly fastened to the connections.- If necessary, carry out continuity tests.- Secure the parking sensor wiring in the retaining collars inside the rear bumper.- Connect the electrical connections to the parking sensors.
DescriptionConnector
PARKING SENSOR UNIT    See K097 PARKING SENSORS
- Connect the electrical connection of the parking sensor wiring.
DescriptionConnector
PARKING SENSOR COUPLING    See D089 PARKING SENSOR COUPLING
    Op. 7210E66 R.R. REAR BUMPER- Connect the negative battery terminal.
DescriptionConnector
BATTERY    See A001 BATTERY