| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION | 
|---|
|  | Connect the Examiner equipment to the diagnostic socket.Check that there are no faults in the instrument panel | Move on to Step 2 | Presence of errors | Continue following the instructions for the diagnostic equipment | 
| 2 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION | 
|---|
|  | Keeping the Examiner equipment connected to the diagnostic socket, check the operation of the pointer in active diganosis | Move on to Step 3 | Speedometer not working | Replace instrument panel    Op. 5560B10 CONTROL PANEL - R+R | 
| 3 | ELECTRICAL CIRCUIT CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION | 
|---|
|  | Check connections between instrument panel, Body Computer and ABS control unit    See E4010 INSTRUMENT PANEL | Move on to Step 4 | 1.Wiring defective | 1.Repair/replace the wiring | 
| 2.ABS faulty | 2.Restore ABS    See E7020 ABS | 
| 4 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION | 
|---|
|  | Check that the fault is no longer present | End of diagnosis |  |  |