194002128 - 1016E14 VALVE GUIDES IN SINGLE CYLINDER HEAD - REPLACE DURING OP. 1016E10

Removing ( Refitting ) 1. Remove the valve guides (1a) using the tool (1b).
DescriptionCodeFunction
1bExtractor/Fitting tool1.870.880.000Valve guide extraction
Refitting ( Removing ) Check that the outer diameter of the valve guides to be fitted corresponds to the recommended figures.
SubjectValue
.Cylinder head valve guides (all)mm
-Outer diameter11,010 - 11,030
SubjectValue
.Cylinder head valve guides (all)mm
-Valve guide oversizing0,05 - 0,1 - 0,2 - 0,25
1. Fit the new valve guides (1a) using the tools (1b) and (1c).
DescriptionCodeFunction
1bExtractor/Fitting tool1.871.000.600Valve guide fitting
DescriptionCodeFunction
1cExtractor/Fitting tool1.870.880.000Valve guide extraction
Ream the valve guide bore to the recommended figure.
SubjectValue
.Cylinder head valve guides (all)mm
-Inner diameter5,40 ÷ 5,60