194002180 - 1060G90 SYSTEM CABLE LOOM - R.R.

Removing ( Refitting ) - Position the vehicle on a lift.    Op. 1016A10 SOUND-PROOFING COVER - R.R    Op. 5530B10 BATTERY - R+R    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.1. Open the junction unit cover and disconnect the electrical connections.
DescriptionConnector
1Engine compartment junction unit    See B001 ENGINE COMPARTMENT JUNCTION UNIT
1. Disconnect the electrical connection from the turbocharger vane position actuator solenoid valve.
DescriptionConnector
1Turbine variable geometry control solenoid    See L036 TURBINE VARIABLE GEOMETRY CONTROL SOLENOID VALVE
1. Disconnect the electrical connections from the heater plugs control unit.
DescriptionConnector
1Heater plugs control unit    See M015 HEATER PLUGS CONTROL UNIT
2. Disconnect the intermediate engine wiring coupling.
DescriptionConnector
2Engine cables/engine services cable coupling    See D029 ENGINE CABLES/ENGINE SERVICES CABLE COUPLING
1. Disconnect the electrical connection from the particle filter differential pressure sensor.
DescriptionConnector
1FAP differential pressure sensor    See K187 FAP DIFFERENTIAL PRESSURE SENSOR
1. Disconnect the electrical connection from the water presence sensor on the fuel filter.
DescriptionConnector
1Water in diesel filter sensor    See K031 WATER IN DIESEL FILTER SENSOR
1. Disconnect the electrical connection from the air conditioning system multi-stage pressure switch.
DescriptionConnector
1Linear sensor for fans    See K120 LINEAR SENSOR FOR FANS
2. Undo the nut (2a) and disconnect the earth lead (2b).
    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.1. Disconnect the electrical connection from the diesel electronic injection system control unit.
DescriptionConnector
1Engine management control unit    See M010 ENGINE MANAGEMENT CONTROL UNIT
1. Disconnect the electrical connection from the engine rpm sensor.
DescriptionConnector
1Engine rpm sensor    See K046 RPM SENSOR
2. Disconnect the electrical connection from the engine oil level sensor.
DescriptionConnector
2Engine oil level sensor    See K032 ENGINE OIL LEVEL SENSOR
1. Disconnect the electrical connection from the engine oil pressure warning light switch.
DescriptionConnector
1Insufficient engine oil pressure sensor (switch)    See K030 INSUFFICIENT ENGINE OIL PRESSURE SENSOR
2. Undo the fixing nuts (2a) and disconnect the electrical connections (2b) from the alternator.
DescriptionConnector
2bAlternator    See A010 ALTERNATOR
1. Undo the nuts (1a) and disconnect the electrical connections (1b) from the starter motor.
DescriptionConnector
1bStarter motor    See A020 STARTER MOTOR
1. Disconnect the electrical connections from the power steering pump.
DescriptionConnector
1Electric steering control unit    See M086 CONTROL UNIT
The version with ABS is shown in the diagram. The version with ESP comes with the two electrical connections indicated plus a third electrical connection with wiring for connection to the steering angle sensor.
1. Disconnect the electrical connection from the cam angle sensor.
DescriptionConnector
1Timing sensor    See K047 TIMING SENSOR
2. Disconnect the electrical connection of the air conditioner compressor.
DescriptionConnector
2Air conditioning compressor engagement electro-magnet    See L020 AIR CONDITIONING COMPRESSOR ENGAGEMENT ELECTRO-MAGNET
3. Disconnect the electrical connections from the injectors.
DescriptionConnector
3Injector    See N070 INJECTOR
4. Disconnect the electrical connection from the fuel pressure regulator on the injector single manifold.
DescriptionConnector
4Fuel pressure regulator on rail    See N087 FUEL PRESSURE REGULATOR ON RAIL
5. Disconnect the electrical connection from the fuel pressure sensor.
DescriptionConnector
5Fuel pressure sensor    See K083 FUEL PRESSURE SENSOR
6. Disconnect the electrical connections from the heater plugs.
DescriptionConnector
6Heater plugs    See A040 HEATER PLUGS
1. Disconnect the electrical connection for the pressure relief sensor.
DescriptionConnector
1Air pressure - temperature sensor    See K044 AIR PRESSURE - TEMPERATURE SENSOR
1. Disconnect the electrical connection from the fuel pressure regulator on the pressure pump.
DescriptionConnector
1Fuel pressure regulator    See N077 FUEL PRESSURE REGULATOR
1. Disconnect the electrical connection from the EGR system solenoid valve
DescriptionConnector
1EGR solenoid valve    See L030 EGR SOLENOID VALVE
    Op. 1080D34 ENGINE OIL VAPOUR SEPARATOR - R + R1. Disconnect the electrical connection from the throttle control shaft valve for the inlet ducts.
DescriptionConnector
1Flow modifier solenoid valve    See L064 FLOW MODIFYING SOLENOID VALVE
1. Disconnect the electrical connection from the engine coolant temperature sensor.
DescriptionConnector
1Engine coolant temperature sensor/sender unit    See K036 ENGINE COOLANT TEMPERATURE SENSOR/SENDER UNIT
1. Disconnect the electrical connection from the throttle casing.
DescriptionConnector
1Integrated throttle casing actuator    See N075 INTEGRATED THROTTLE CASING ACTUATOR
- Release the system cable loom from the fastenings and remove it. Refitting ( Removing ) - Place the system cable loom in its housing and secure it.- Connect the electrical connection to the throttle casing.- Connect the electrical connection to the engine coolant temperature sensor.- Connect the electrical connection to the throttle control shaft valve for the inlet ducts.    Op. 1080D34 ENGINE OIL VAPOUR SEPARATOR - R + R- Connect the electrical connection to the EGR system solenoid valve- Connect the electrical connection to the fuel pressure regulator on the pressure pump.- Connect the electrical connection for the pressure relief sensor.- Connect the electrical connections to the heater plugs.- Connect the electrical connection to the fuel pressure sensor.- Connect the electrical connection to the fuel pressure regulator on the injector single manifold.- Connect the electrical connections to the injectors.- Connect the air conditioning compressor electrical connection.- Connect the electrical connection to the cam angle sensor.- Connect the electrical connections to the power steering pump.- Connect the electrical connections to the starter motor and secure them using the nuts.- Connect the electrical connections to the alternator and secure them using the nuts.- Connect the electrical connection to the engine oil pressure warning light switch.- Connect the electrical connection to the engine oil level sensor.- Connect the electrical connection for the engine rpm sensor.- Connect the electrical connection to the diesel electronic injection system control unit.    Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.- Connect the earth lead and tighten the nut.- Connect the electrical connection to the air conditioning system multi-stage pressure switch.- Connect the electrical connection to the water presence sensor on the fuel filter.- Connect the electrical connection to the particle filter differential pressure sensor.- Connect the intermediate engine wiring coupling.- Connect the electrical connections to the heater plugs control unit.- Connect the electrical connection to the turbocharger vane position actuator solenoid valve.- Connect the electrical connections and close the junction unit cover.    Op. 1048A10 AIR FILTER ASSEMBLY - R.R.    Op. 5530B52 BATTERY SUPPORT/DRIP TRAY - R.R    Op. 5530B10 BATTERY - R+R    Op. 1016A10 SOUND-PROOFING COVER - R.R- Remove the vehicle from the lift.