1072B60 THROTTLE SHAFT CONTROL VALVE FOR INLET PORTS R R - Fiat - CROMA - eLearn

194002182 - 1072B60 THROTTLE SHAFT CONTROL VALVE FOR INLET PORTS R R

) - Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A001 BATTERY

Op. 1016A10 SOUND-PROOFING COVER - R.R Op. 1060G70 VACUUM RESEVOIR - R.R Op. 1080D34 ENGINE OIL VAPOUR SEPARATOR - R + R1. Disconnect the electrical connection from the throttle control shaft valve for the inlet ducts.

	Description	Connector
1	Flow modifier solenoid valve	See L064 FLOW MODIFYING SOLENOID VALVE

2. Disconnect the linkage for the throttle control shaft valve for the inlet ducts.3. Undo the nuts (3a) and remove the throttle control shaft valve for the inlet ducts (3b).

Refitting ( Removing

) 1. Place the throttle control shaft valve for the inlet ducts (1a) in its housing and secure it tightening the nuts (1b) to the recommended torque.

Component	Fastening	dia	Value (daNm)	Validity
Throttle carrier shaft control valve for inlet ducts	Nut	M6	0.65 ÷ 0.75	1.9 JTD 16v2.4 JTD 20v

2. Connect the linkage for the throttle control shaft valve for the inlet ducts.3. Connect the electrical connection to the throttle control shaft valve for the inlet ducts.

Op. 1080D34 ENGINE OIL VAPOUR SEPARATOR - R + R Op. 1060G70 VACUUM RESEVOIR - R.R Op. 1016A10 SOUND-PROOFING COVER - R.R- Connect the negative battery terminal.